T A L K S W I T C H C O N F I G U R A T I O N
84
Activate extension area
If you connected a TalkSwitch TS-9112i, TS-9133i or TS-480i IP phone to the LAN and used it to
select an extension number, the
Extension type
and
Type of phone
will be selected. In this case,
you will enter the
First name
and
Last name
, and will select the
System prompt language
.
1. Ensure the
Activate extension
check box is selected.
2. If necessary, set the
Extension type
to
IP extension
.
3. Enter the user’s
First name
and
Last name
. The names are used for caller ID, and appear
within other pages of the TalkSwitch management software. The
Last name
is used with the
dial-by-name directory.
4. If necessary, select
TalkSwitch
as the
Type of phone
, and then select the model. Choices are
TalkSwitch 9112i
,
TalkSwitch 9133i
and
TalkSwitch 480i
.
5. Select the language for prompts heard by the user of the extension in the
System prompt
language
list.
6. Click the
Additional Settings
button to set up:
•
Direct line access (see
Direct line access
on page 62)
•
Hotline access (see
Hotline access
on page 63)
•
Hunt group permissions (see
Hunt group permissions
on page 65)
•
Caller ID settings (see
Caller ID settings
on page 66)
IP extension details area
If you connected a TalkSwitch TS-9112i, TS-9133i or TS-480i IP phone to the LAN and used it to
select an extension number, the
IP Extension Details
area for that extension will be complete.
If necessary, perform the following steps:
1. Set the
Location
. Choices are:
•
Internal
— The phone is an internal IP extension located within the office, and is
connected to the same LAN as the TalkSwitch unit.
