T A L K S W I T C H C O N F I G U R A T I O N
23
3. Double-click the TalkSwitch icon on your desktop to open the TalkSwitch management
software. You can also click
Start
>
Programs > TalkSwitch 6.11 > TalkSwitch
Configuration 6.11
. The
Configuration Selection
page appears, and the software attempts
to detect your TalkSwitch unit.
4. Select your language. You can select
English
,
Français
or
Español
.
5. Once the software detects your TalkSwitch unit, click
Configure Auto-Detected TalkSwitch
System
. The software loads the configuration from the TalkSwitch unit, and the
About
page appears.
6. If the software was unable to detect your TalkSwitch unit, check that all your wires and
plugs are securely connected, and then click
Retry Auto-Discovery
. The software loads the
configuration from the TalkSwitch unit, and the
About
page appears.
7. If auto-detection does not work:
a) Click
Connect to Different System
. The
Connect Via IP
window appears.
b) Enter the
URL / IP address
and
Port
of the TalkSwitch unit, and then click
OK
. This is the
public IP address or FQDN of the TalkSwitch system. The software loads the configuration
from the TalkSwitch unit, and the
About
page appears.
