T A L K S W I T C H C O N F I G U R A T I O N
154
Setting up automatic route selection and toll restriction
The
Auto Route Selection
page allows you to set up automatic route selection (ARS) and
toll restriction.
1. Configure the system password and hunt groups before setting up ARS and toll restriction.
2. Select the
Auto Route Selection
page.
Activate automatic route selection
The
Activate Automatic Route Selection
area allows you to activate automatic route selection,
and then enter leading digits with associated routing or blocking.
1. Select the
Activate Automatic Route Selection
check box.
2. Select a slot for leading digits.
3. Enter the leading digits in the
Leading digits
box.
4. Select the
Action
. Choices are:
•
Hunt group (n)
— Performs ARS by routing the call to the hunt group.
•
Block calls
— Performs toll restriction by blocking the call.
Carrier code prefixes
The
Carrier Code Prefix
area allows you to set up carrier codes the system will automatically use
when the leading digits are dialed. A carrier code is prefixed to the phone number dialed by the
user. It tells the telephone line service provider to route the call to an alternative carrier. For
example, the carrier code could be a calling card number and PIN number. ARS determines the
carrier code based on the leading digits and the time of day.
