T A L K S W I T C H C O N F I G U R A T I O N
168
2. To save the configuration to the auto-discovered local TalkSwitch system, select the
TalkSwitch unit configured as proxy, and then click
OK
.
3. To save the configuration to a remote TalkSwitch system:
a) Click
Other TalkSwitch
. The
Connect Via IP
window appears.
b) Enter the
URL / IP address
of the remote TalkSwitch system, and then click
OK
. You can
also choose the TalkSwitch system from the address book.
Retrieve Settings
The
Retrieve Settings
command opens the configuration from the current TalkSwitch unit. You
can then modify the configuration using the TalkSwitch management software.
Alternatively, you can also click the
Configure Auto-Detected TalkSwitch System
button or
the
Retry Auto Discovery
button in the
Configuration Selection
page.
Close
The
Close
command closes the configuration, and returns to the
Configuration Selection
page.
Exit
The
Exit
command closes the TalkSwitch management software.
