1. Increase volume
2. Lower volume
3. Mute
4: Mute microphone
5: Answer
6: Hang up
7: Mode selection
8: Mode status
indicator
9: Power status
indicator
Bluetooth Mode
USB Mode
AUX Mode
Adapter Mode
LED Indicator
Power status/Charging
10: Audio In
11. USB Slot
12. Power switch
AUX IN
Charing First
!
Please connect the USB cable to iMage A2 Bluetooth Conference Spea-
kerphone to charge it; it is recommended to fully charge the power for
approximately 6 hours (charge until power indicator goes off) before
using it for the first time.
Power Status
When the power is turned on, if one of the four mode indicators on the
right has a blue light on, it means that the unit is currently powered-on.
Charging: When the orange light is constantly on, it means that it is
currently charging; when the orange light goes off, it means
that charging is complete.
Power remaining: If the blue light flickers it means
that there is
sufficient power remaining; if the red light flickers it
means that power is low and requires charging.
Packing
1. iMage A2 Bluetooth Conference Speakerphone
2. Micro-USB cable
3. User manual
Mode selection: Bluetooth Mode
You can connect other portable devices or computer using
Bluetooth connection to make iMage A2 Bluetooth Conference
Speakerphone your multimedia speakerphone.
Connection method:
1. Select “Search for Bluetooth device” on the device you want to
connect.
2. You will see “iMage A2_XX (number differs according to the
different devices)”; click on it to perform pairing.
3. Pairing complete.
Blue light remains constantly on: Bluetooth device has successfully
connected with iMage A2 Bluetooth Conference Speakerphone, and
supports HFP and A2DP.
* If the device could not be paired, you can clear the previous
pairing data to pair it over again; press and hold the hang up
button for 3 seconds and wait until you hear the prompt then
release it to search for iMage A2 Bluetooth Conference
Speakerphone again for pairing.
* Please confirm the Bluetooth chip built in the computer before
connecting to a PC or notebook using Bluetooth Mode, and
download the related driver programs etc. from the original
manufacturer of the chip; please refer to the user manual of your
computer for details.
Dimensions: 165mm X 165mm X 55mm
Product weight: 360±5g
Bluetooth version: Bluetooth v3.0+EDR/HFP/A2DP/WBS
Communication time: 6~8 hr.(BT)
Playback time: 6~8 hr.(BT), 8~10 hr.(AUX)
Standby time: 48~60 hr.(BT)
Battery capacity: 950mAH
Reception angle: Omni-Directional
Operating frequency: 2402MHz-2480MHz
Reception distance: 0.3~3m
Audio output: Bluetooth/USB
Audio input: Bluetooth/USB/AUX
Module type: GFSK
Antenna type: Build-in Antenna
Operating environment: 0 ~ 70
℃
* Note: Data listed above were measured by actual testing in laboratories;
actual data may differ according to usage scenarios.
iMage A2 Bluetooth Conference Speakerphone
I/O Port buttons and slots
Welcome!
Thank you for purchasing iMage A2 Bluetooth Conference
Speakerphone; this instruction manual will guide you on how to start
using this product.
Start
T
urn on the power and start iMage A2 Bluetooth Conference
Speakerphone; press the (mode selection) button to select the
mode you need.
Note: The battery life will significantly decrease if your device has not
been charged for a lone time.Therefore, we recommend you t
o charge
your device at least once every week
.
Specification
Mode selection: AUX Mode
You can make iMage A2 Bluetooth Conference Speakerphone an
expansion speaker by connecting it to a signal source using a 3.5Ø
audio cable.
Connection method: Connect the audio output of the device (PC, NB
etc.) to the Audio In socket(3.5Ø jack) of iMage A2 Bluetooth
Conference Speakerphone.
