Sony Pro 10 User Manual Download Page 44

Page: 44 / 382

Navigation toolbar

The Navigation toolbar contains buttons used to navigate within the current data window.

Zoom In Full

Magnifies the selected area to a 24:1 ratio.

Zoom Normal

Resets the audio data to its original

magnification.

Zoom Selection

Maximizes the selection vertically and

horizontally.

Custom Zoom 1

Sets the audio data to a custom time

magnification level.

Custom Zoom 2

Sets the audio data to a custom time

magnification level.

Mark In

Marks the “in” point of a new selection.

For more

information, see

Selecting audio during playback

on page

Mark Out

Marks the “out” point of a new selection.

For

more information, see

Selecting audio during playback

page

Go To

Displays the Go To dialog and allows you to quickly

move the cursor to a specific point in a file.

For more

information, see

Setting the cursor position

on page

Cursor Center

Centers the display with the cursor

displayed in the center of the data window.

Cursor to Selection Start

Moves the cursor to the

beginning of the selection.

Tempo box

Cursor to Selection End

Moves the cursor to the end of

the selection.

Center Sustaining Start

Moves the cursor to the

beginning of the sustaining loop.

Center Sustaining End

Moves the cursor to the end of the

sustaining loop.

Center Release Start

Moves the cursor to the beginning of

the release loop.

Center Release End

Moves the cursor to the end of the

release loop.

Double Selection

Doubles the size of the current

selection.

Halve Selection

Divides the current selection in half.

Shift Selection Left

Shifts the current selection to the left

so the current start point becomes the end point.

Shift Selection Right

Shifts the current selection to the

right so the current end point becomes the start point.

The Navigation toolbar also contains a

Tempo

box that appears to the right of the toolbar buttons. This box calculates and displays the

tempo of the current selection as is if the selection represents a complete measure.

Views toolbar

The Views toolbar contains buttons used to store and retrieve data window views.

Toggles views 1-8 between setting and restoring.

Stores and recalls specific selection views.

Status/Selection toolbar

The Status/Selection toolbar contains buttons used to specify a file’s status format and control snapping functions.

Samples

Changes the status format to Samples.

Time

Changes the status format to Time.

Seconds

Changes the status format to Seconds.

Time & Frames

Changes the status format to Time &

Frames.

Absolute Frames

Changes the status format to Absolute

Frames.

Measures & Beats

Changes the status format to Measures

& Beats.

SMPTE Film Sync (24 fps)

Changes the status format to

SMPTE Film Sync (24 fps).

SMPTE EBU

Changes the status format to SMPTE EBU

(25 fps).

SMPTE Non-Drop

Changes the status format to SMPTE

Non-Drop (29.97 fps, Video).

SMPTE Drop

Changes the status format to SMPTE Drop

(29.97 fps, Video).

SMPTE 30

Changes the status format to SMPTE 30 (30 fps,

Audio).

Audio CD Time

Changes the status format to Audio CD

Time.

Edit Tempo

Calculates the musical tempo (beats per

minute) based upon the current selection.

CHAPTER 2

Summary of Contents for Pro 10































































































































































































































































































































































































Search results

Summary of Contents for Pro 10

Reviews:

Related manuals for Pro 10

Brands by name

Popular brands

Sony Pro 10, User Manual

Search results

Summary of Contents for Pro 10

Reviews:

Related manuals for Pro 10

Brands by name

Popular brands