manualshive.com logo in svg

Sony Pro 10, User Manual

Get the most out of your Sony Pro 10 with our comprehensive and easy-to-follow User Manual. Discover all the features and functions of this powerful device with the help of our free manual. Simply download it from manualshive.com and unleash the full potential of your Sony Pro 10.

Share
Download
background image

Appendix B 

Microsoft Audio Compression Manager 

The Microsoft Audio Compression Manager (ACM) is a standard interface for audio compression in Windows. This interface allows 
applications such as Sound Forge® Pro to use compression algorithms provided by other companies. 

Sound Forge software fully supports audio compression through the ACM. This allows you to use any ACM-compatible compression. 
Compressed WAV files are transparently opened and all available compression formats for WAV files are provided in the Save As dialog. 

There are two major components to the ACM: 

•  

Audio data compression and decompression 

•  

Transparent playback and recording of non-hardware supported audio files 

Audio data compression and decompression 

The first component of the ACM allows audio data to be compressed and decompressed. Audio compression is used to decrease the 
amount of data required to represent a sound and results in smaller sound files. However, there are drawbacks to using audio 
compression on sound files: 

•  

Most audio compression algorithms degrade sound quality. This is referred to as lossy compression because information contained 
in the sound is lost when it is compressed. The amount of sound degradation is dependent upon the algorithm. 

•  

Compressed audio requires more processing time than uncompressed data. The amount of processing time is dependent on the 
algorithm as well as the system’s hardware. Typically, opening and saving compressed files takes longer than uncompressed files. 

•  

Compressed files are not as portable as uncompressed files. To distribute WAV files in a compressed format, you must verify that the 
audience can use them. Also, not all audio software can use compressed WAV files, which may make using other applications with 
the Sound Forge software difficult. 

In Sound Forge software, any compressed WAV file can be opened if a compatible ACM driver is installed. If no compatible ACM driver is 
available for a compressed WAV file, you are alerted to the problem. 

Saving compressed WAV files is as simple as specifying the compression algorithm in the 

Format

 drop-down list of the Custom Settings 

dialog. Once a compressed file is saved, updates to the file are automatically saved using the selected compression algorithm. The 
compression format can be changed later—or reverted to an uncompressed format—using the Save As dialog. 

APPENDIX B 

| 

337 

Summary of Contents for Pro 10































































































































































































































































































































































































Reviews:

No comments

Related manuals for Pro 10

Acer AO533 Driver Installation preview
AO533
Brand: Acer Pages: 4
Canon EOS 60D Quick Start Manual preview
EOS 60D
Brand: Canon Pages: 5
Samsung SCX 4500 - B/W Laser - All-in-One Manual preview
SCX 4500 - B/W Laser - All-in-One
Brand: Samsung Pages: 21
Samsung SCX 4828FN - Laser Multi-Function Printer Manual preview
SCX 4828FN - Laser Multi-Function Printer
Brand: Samsung Pages: 38
Samsung SCX 4725FN - B/W Laser - All-in-One Manual preview
SCX 4725FN - B/W Laser - All-in-One
Brand: Samsung Pages: 33
AMX Content Database Editor v 1.0 Manual preview
Content Database Editor v 1.0
Brand: AMX Pages: 28
Savin RW-470 Clients Installation Manual preview
RW-470 Clients
Brand: Savin Pages: 71
Fargo Persona Persona M30e User Manual preview
Persona Persona M30e
Brand: Fargo Pages: 31
Brother PE-Design Next Instruction Manual preview
PE-Design Next
Brand: Brother Pages: 320
Symantec Veritas CommandCentral 5.1 Getting Started Manual preview
Veritas CommandCentral 5.1
Brand: Symantec Pages: 52
Seagate FreeAgent Desk Specifications preview
FreeAgent Desk
Brand: Seagate Pages: 2
Sony D-NE329SP - Atrac Cd Walkman Portable Player Specifications preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE20 - Atrac Cd Walkman Specifications preview
D-NE20 - Atrac Cd Walkman
Brand: Sony Pages: 2
Sony D-NE326CK - Atrac Cd Walkman Portable Player Specifications preview
D-NE326CK - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE329SP - Atrac Cd Walkman Portable Player Service Manual preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 32
Sony D-NE1 - Portable Cd Player Service Manual preview
D-NE1 - Portable Cd Player
Brand: Sony Pages: 34
Sony D-NE326CK - Atrac Cd Walkman Portable Player Operating Instructions Manual preview
D-NE326CK - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 35
Sony D-NE1 - Portable Cd Player Operating Instructions Manual preview
D-NE1 - Portable Cd Player
Brand: Sony Pages: 116

Brands by name

Popular brands

Load more brands