Sony Pro 10 User Manual Download

Page: 39 / 382

Displaying data window components

You can customize the appearance of individual data windows.

From the

Options

menu, choose

Data Window

, and then choose components from the submenu to display or hide those components.

Choose

Set as Default

to set the current configuration as the default data window appearance.

Tip:

Right-click the Edit Tool Selector to display or hide components for the selected data window.

Arranging data windows

You can use the commands on the

Window

menu to arrange data windows in the Sound Forge workspace.

Tip:

Press Ctrl+Tab to switch forward through the open windows, or press Ctrl+Shift+Tab to switch backward through the open windows.

Command

Description

New Window

Creates a new data window.

Cascade

Arranges all open data windows so they overlap with the title bar of each window
remaining visible.

Tile Horizontally

Arranges all open data windows top to bottom with no overlapping.

Note:

This command affects only non-minimized windows.

Tile Vertically

Arranges all open data windows left to right with no overlapping.

Note:

This command affects only non-minimized windows.

Arrange Icons

Arranges minimized data windows at the bottom of the workspace.

Maximize All

Maximizes all open data windows. Tabs for each data window also appear if the

Tabs

for maximized data windows

setting is set to

Top

Bottom

For more information,

Minimize All

Minimizes all open data windows.

Restore All

Restores all minimized windows to their previous window size and position.

Close All

Closes all open data windows.

Window List

Switches focus to another data window.

LEARNING THE SOUND FORGE PRO WORKSPACE

Summary of Contents for Pro 10































































































































































































































































































































































































Search results

Summary of Contents for Pro 10

Reviews:

Related manuals for Pro 10

Brands by name

Popular brands

Sony Pro 10, User Manual

Search results

Summary of Contents for Pro 10

Reviews:

Related manuals for Pro 10

Brands by name

Popular brands