7-6
DVW-250/250P
3. F FWD mode (Beginning portion of the tape)
(1) Put into the F FWD mode at the beginning portion of
an alignment tape ZR2-1/1P (from 5:00 to 10:00)
(2) Check that the tape runs without any curl at S5 guide,
S4 guide and S3 guide.
If tape curl occurs by all means, the tape curl shown in
the table below is acceptable.
4. REW mode (Beginning portion of the tape)
(1) Put into the REW mode at the beginning portion of an
alignment tape ZR2-1/1P (from 5:00 to 10:00)
(2) Check that the tape runs without any curl at S5 guide,
S4 guide and S3 guide.
If tape curl occurs by all means, the tape curl shown in
the table below is acceptable.
If not, perform the adjustment from steps 9) and later.
5. Play mode (Latter half portion of the tape
without last 10 minutes.)
(1) Put into the PLAY mode at the end portion of BCT-
D124L.
(2) Check the tape running conditions as the same manner
of step (2) in 1.
If not, perform the adjustment from steps 9) and later.
6. REV SEARCH mode
(Latter half portion of the tape without last 10
minutes.)
(1) Put into the REV SEARCH mode at the end portion of
BCT-D124L.
(2) Check the tape curl as the same manner of step (3) in 2.
If not, perform the adjustment from steps 9) and later.
7. F FWD mode
(Latter half portion of the tape without last 10
minutes.)
(1) Put into the F FWD mode at the end portion of BCT-
D124L.
(2) Check the tape curl as the same manner of step (2) in 3.
If not, perform the adjustment from steps 9) and later.
8. REW mode (Latter half portion of the tape
without last 10 minutes.)
(1) Put into the REW mode at the end portion of BCT-
D124L.
(2) Check the tape curl as the same manner of step (2) in 4.
If not, perform the adjustment from steps 9) and later.
7-2-1. S3/S5 Tape Guides Height Adjustment
