3-3
DVW-250/250P
Audio Meter LCD
Discription
SYSTEM PHS
SYNC PHASE
............. Adjust the phase of the sync signal.
-8 to +8 in 1 sc steps.
SC PHASE
............. Adjust the subcarrier phase of the sync signal.
0 to 965 in 0.29 ns steps.
EXIT
AUDIO
INPUT 1/2
............. Select audio input for channels 1 and 2 when digital video input is selected.
ANA : analog audio input
DIGI : digital audio input
INPUT 3/4
............. Select audio input for channels 3 and 4 when digital video input is selected.
ANA : analog audio input
DIGI : digital audio input
EMPHASIS
............. Toggle emphasis on analog audio input.
OFF : no emphasis
ON
: Apply emphasis.
DOUBLE REC
............. Toggle simultaneous recording of audio channels 1 and 2 on channels 3 and 4.
OFF : Record separate signals on channels 1/2 and 3/4.
ON
: Record same signals on channels 1/2 and 3/4.
EXIT
SYSTEM 1
PREROLL
............. Set the preroll time for editing using the REMOTE connector.
0 to 10 seconds in 1 second steps
POSTROLL
............. Set the postroll time for editing using the REMOTE connector.
0 to 10 seconds in 1 second steps
SEARCH
............. Select the tape speed in search operations.
(Both forward and reverse)
X2
: 2 times normal speed
X5
: 5 times normal speed
X8
: 8 times normal speed
P-ON REC
............. Select whether to start recording automatically at power on.
OFF : Do not start recording.
ON
: Start recording.
EXIT
SYSTEM 2
TC OUT
............. Select the signal output from the TC OUT connector.
GEN : time code produced by the time code generator.
AUTO : during recording (including E-E mode),the time code produced by the time code generator,
during playback, the LTC signal from the tape.
TC DELAY
............. Toggle the LTC phase correction for the output from the TC OUT connector.
OFF : no phase correction to LTC signal
AUTO : Adjust phase of LTC signal to correspond to the video output.
REC RUN
............. Select time code recorded when F-RUN/R-RUN switch set to R-RUN.
INT
: time code produced by time code generator
TAPE : time code played back from tape
EXIT
3-1. Setup Menu
