G code program parameters
ShopTurn program parameters
RP
Retraction plane
mm
T
Tool name
SC
Safety clearance
mm
D
Cutting edge number
F
Feedrate
Path/rev
Path/min
F
Linear feedrate
Feedrate per revolution
mm/min
mm/rev
S / V
Direction of spindle ro‐
tation
S / V
Spindle speed or
Constant cutting rate
rpm
m/min
Spindle speed or
Constant cutting rate
rpm
Distance/mi
n
Parameter
Description
Unit
Machining
position
(only G code)
● Single position
Drill hole at programmed position
● Position pattern with MCALL
Z0 (only G code) Reference point Z
mm
Machining
surface
(only ShopTurn)
● Face
● Face B
● Peripheral
Position (only for
ShopTurn)
● At the front (face)
● At the rear (face)
● Outside (peripheral surface)
● Inside (peripheral surface)
Drilling depth
● Shank (drilling depth in relation to the shank)
The drill is inserted into the workpiece until the drill shank reaches the value
programmed for Z1. The angle entered in the tool list is taken into account.
● Tip (drilling depth in relation to the tip)
The drill is inserted into the workpiece until the drill tip reaches the value
programmed for Z1.
Z1
Final drilling depth (abs) or final drilling depth in relation to Z0 (inc).
It is inserted into the workpiece until it reaches Z1.
mm
Coolant on -
(only G code)
M function to switch on the coolant.
Technology at
the entrance to
the hole
Selecting the drilling feedrate
● Without predrilling
Drilling with feedrate F
● With predrilling
Drilling with feedrate FA
● With pilot hole
Insertion in the pilot hole with feedrate FP.
ZP - (only for pi‐
lot hole)
Depth of the pilot hole as a factor of the bore diameter
Depth of the pilot hole in relation to Z0 (inc) or depth of the pilot hole (abs)
* Ø
mm
Programming technology functions (cycles)
10.1 Drilling
Turning
Operating Manual, 06/2019, A5E44903486B AB
367
