R
23 abs
X
60 abs
K
-35 abs I 80 abs
Afterwards, entry fields are inactive.
6.4
Using the "Dialog selection" softkey, select a required contour element
and confirm using the "Dialog accept" softkey. The entry fields are active
again. Enter the additional parameters.
FS
2
6.5
Z
-80 abs
R
6
6.6
X
90 abs
Z
-85 abs
FS 3
6.7
Z
-95 abs
7.
Press the "Accept" softkey.
Finished-part contour
5. Stock removal (roughing)
1.
Press the "Cont. turn." and "Stock removal" softkeys.
The "Stock Removal" input window opens.
2.
Enter the following technology parameters:
T Roughing tool 80 D1
F 0.350 mm/rev
V 400 m/min
3.
Enter the following parameters:
Machining
Roughing (∇)
Machining direction
Longitudinal
Creating a ShopTurn program
9.19 Example: Standard machining
Turning
Operating Manual, 06/2019, A5E44903486B AB
331
