<ALT> + <S>
Opens the editor to enter Asian characters.
<ALT> + <Cursor up>
Moves the block start or block end up in the editor.
<ALT> + <Cursor down>
Moves the block start or block end down in the editor.
<DEL>
● Editing box
Deletes the first character to the right of the cursor.
● Navigation
Deletes all characters.
<DEL> + <CTRL>
● Editing box
Deletes the first word to the right of the cursor.
● Navigation
Deletes all characters.
<Spacebar>
● Editing box
Inserts a space.
● Switches between several specified options in selection lists and
in selection boxes.
<Plus>
● Opens a directory which contains the element.
● Increases the size of the graphic view for simulation and
traces.
<Minus>
● Closes a directory which contains the element.
● Reduces the size of the graphic view for simulation and traces.
<Equals>
Opens the calculator in the entry fields.
<Asterisk>
Opens a directory with all of the subdirectories.
<Tilde>
Changes the sign of a number between plus and minus.
<INSERT>
● Opens an editing window in the insert mode. Pressing the key
again, exits the window and the entries are undone.
● Opens a selection box and shows the selection possibilities.
● In the machining step program, enters an empty line for G code.
● Changes into the double editor or into the multi-channel view
from the edit mode into the operating mode. You can return to the
edit mode by pressing the key again.
Introduction
2.2 Operator panel fronts
Turning
36
Operating Manual, 06/2019, A5E44903486B AB
