Parameter
Description
Unit
Machining
surface
(only ShopTurn)
● Face
● Face B
● Peripheral
Z1
Final drilling depth (abs) or final drilling depth in relation to Z0 (inc)
It is inserted into the workpiece until it reaches Z1.
mm
Coolant on -
(only G code)
M function to switch on the coolant
ZP
Depth of the pilot hole as a factor of the bore diameter
Depth of the pilot hole in relation to Z0 (inc) or depth of the pilot hole (abs)
* Ø
mm
ZPV
Clearance distance of pilot hole
mm
FP
First cut feedrate in percent of the drilling feedrate
%
First cut feedrate (ShopTurn)
mm/rev or mm/min
First cut feedrate (G code)
distance/min or dis‐
tance/rev
SP
Spindle position during approach (spindle off)
Degrees
Soft section
● Yes
First cut with feedrate FS
● No
First cut with drilling feedrate
ZS1
(only "Yes" for
soft first cut)
Depth of each first cut with constant first cut feedrate FS (inc)
mm
ZS2
(only "Yes" for
soft first cut)
Depth of each first cut for feedrate increase (inc)
mm
FS
(only "Yes" for
soft first cut)
First cut feedrate in percent of the drilling feedrate
%
First cut feedrate (ShopTurn)
mm/min or mm/rev
First cut feedrate (G code)
distance/min or dis‐
tance/rev
Through drilling ● Yes
Through drilling with feedrate FD
● No
ZD - (only for
through drilling
"yes")
Depth for through drilling feedrate (abs) or depth for through drilling feedrate in rela‐
tion to Z1 (inc)
mm
FD - (only for
through drilling
"yes")
Feedrate for through drilling referred to drilling feed rate F
%
Feedrate for through drilling (ShopTurn)
mm/min or mm/rev
Feedrate for through drilling (G code)
distance/min or dis‐
tance/rev
Coolant off -
(only G code)
M function to switch off the coolant
Programming technology functions (cycles)
10.1 Drilling
Turning
Operating Manual, 06/2019, A5E44903486B AB
371
