Procedure
1.
The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2.
Press the "Drilling" softkey.
3.
Press the "Positions" and "Arbitrary positions" softkeys.
The "Positions" input window opens.
Parameter
Description
Unit
LAB
(only for G code)
Repeat jump label for position
PL
(only for G code)
Machining plane
Axes
(only for G code)
Selection of the participating axes
● XY (1st and 2nd axis of the plane)
● ZC (rotary axis and assigned linear axis)
● YZC (rotary axis and both axes of the plane)
Note:
Rotary axes are only displayed in the selection field if they have been released for use in
the position pattern.
Please observe the information provided by your machine manufacturer.
Machining
surface
(only for Shop‐
Turn)
● Face C
● Face Y
● Face B
● Peripheral surface C
● Peripheral surface Y
Position
(only for Shop‐
Turn)
● At the front (face)
● At the rear (face)
● Outside (peripheral surface)
● Inside (peripheral surface)
Coordinate
system
(only for Shop‐
Turn)
● Right-angled or polar
Dimensions in right-angled coordinates or polar coordinates (only for face C and face
Y)
● Right-angled or cylindrical
Dimensions in right-angled coordinates or cylindrical coordinates - (only for peripheral
surface C)
Programming technology functions (cycles)
10.1 Drilling
Turning
388
Operating Manual, 06/2019, A5E44903486B AB