G2: Velocities, setpoint / actual value systems, closed-loop control
7.2 Velocities, traversing ranges, accuracies
Basic Functions
338
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
The following applies:
Selected input/output unit = MD10230 * internal unit
In the machine data:
MD10230 $MN_SCALING_FACTORS_USER_DEF[n]
the selected input/output unit printed in each case in the internal units 1mm, 1 degree and 1 s must be input.
Example 1:
Machine data input/output of the linear velocities is to be in m/min instead of mm/min (initial state).
(The internal unit is mm/s)
⇒
The scaling factor for the linear velocities is to differ from the standard setting. For this
in the machine data:
MD10220 $MN_SCALING_USER_DEF_MASK
the bit number 2 must be set.
⇒ MD10220 $MN_SCALING_USER_DEF_MASK = 'H4'; (bit no. 2 as hex value)
⇒
The scaling factor for the linear velocities is to differ from the standard setting. For this
in the machine data:
MD10220 $MN_SCALING_USER_DEF_MASK
the bit number 2 must be set.
⇒ MD10220 $MN_SCALING_USER_DEF_MASK = 'H4'; (bit no. 2 as hex value)
,QSXWRXWSXWXQLWVIRUPDFKLQH
DQGVHWWLQJGDWD
)RUPDWFRQYHUVLRQ
,QWHUQDOXQLWV
8VHUGHILQHG
0'6&$/,1*B)$&7256B86(5B'()>Q@
0'6&$/,1*B)$&7256B86(5B'()B0$6.
'RWKHLQSXW
RXWSXWXQLWV
FRUUHVSRQGWRWKH
VWDQGDUGEDVLFV\VWHP"
1R
<HV
