
List of Parameters
Parameters
1-111
© Siemens AG 2009 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 11/2009
Description:
Sets the signal source for the 1st OC/OFF3.
The AND logic operation of the 1st OC/OFF3 and 2nd OC/OFF3 results in control word 1, bit 2 (OC/OFF3).
Caution:
When "master control from PC" is activated, this binector input is ineffective.
Notice:
The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
Note:
Bit 2 = 0: OFF3 (braking along the OFF3 ramp (p1135), then pulse suppression and switching on inhibited)
Bit 2 = 1: No OFF3 (enable is possible)
OC: Operating condition
Description:
Sets the signal source for the 1st OC/OFF3.
The AND logic operation of the 1st OC/OFF3 and 2nd OC/OFF3 results in control word 1, bit 2 (OC/OFF3).
Caution:
When "master control from PC" is activated, this binector input is ineffective.
Notice:
The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
Note:
Bit 2 = 0: OFF3 (braking along the OFF3 ramp (p1135), then pulse suppression and switching on inhibited)
Bit 2 = 1: No OFF3 (enable is possible)
OC: Operating condition
Description:
Sets the signal source for the 2nd OC/OFF3.
The AND logic operation of the 1st OC/OFF3 and 2nd OC/OFF3 results in control word 1, bit 2 (OC/OFF3).
Note:
Bit 2 = 0: OFF3 (braking along the OFF3 ramp (p1135), then pulse suppression and switching on inhibited)
Bit 2 = 1: No OFF3 (enable is possible)
OC: Operating condition
p0848[0...n]
BI: 1. OFF3 / 1. OFF3
CU230P-2 CAN
CU230P-2 HVAC
Access level:
3
Calculated:
-
Data type:
U32 / Binary
Can be changed:
T
Scaling:
-
Data set:
CDS, p0170
Min Max Factory
setting
- - 1
p0848[0...n]
BI: 1. OFF3 / 1. OFF3
CU230P-2 DP
Access level:
3
Calculated:
-
Data type:
U32 / Binary
Can be changed:
T
Scaling:
-
Data set:
CDS, p0170
Min Max Factory
setting
- - 2090.2
p0849[0...n]
BI: 2. OFF3 / 2. OFF3
Access level:
3
Calculated:
-
Data type:
U32 / Binary
Can be changed:
T
Scaling:
-
Data set:
CDS, p0170
Min Max Factory
setting
- - 1
Summary of Contents for CU230P-2 CAN
Page 1: ...s SINAMICS G120 Control Units CU230P 2 Parameter Manual 11 2009 SINAMICS ...
Page 2: ......
Page 667: ......