56 S&C Instruction Sheet 1043-550
Category
Event Description
Definition
Log Level
IntelliTEAM
Volt/fault reset occurred (Sw)
The voltage loss and overcurrent indications maintained by
the IntelliTEAM II software have been reset after either the
Sectionalizer Reset Time or, if a transfer event has occurred,
after team reconfiguration is complete.
Extended
IntelliTEAM
Action path complete (Team)
This message is displayed when the action path for operating
the switch gear has completed all possible steps in either the
forward or reverse direction.
All
IntelliTEAM
Coach arrived (Team)
This message logs the arrival of the coach, along with all the
updated data, at the local team member for the specified team.
All
IntelliTEAM
Coach arrived on request (Team)
This message logs the arrival of the coach at the local team
member of the specified team after the local team member
requested the coach.
All
IntelliTEAM
Coach hold override (Team, Goto
Rec )
When the team member of the specified team holds the coach
for an extended period of time, an override occurs that allows
the coach to briefly visit other team members. This prevents
the coach from becoming old and regenerated by an adjacent
team member. The team record where the coach is going is
also shown.
All
IntelliTEAM
Coach is held by member (Team)
The coach for the specified team is being held by the local
team member. This occurs when a process is taking place at the
local team member that requires the presence of coaches from
both adjacent teams.
All
IntelliTEAM
Coach left (Team, Goto Rec)
This message logs the departure of the coach from the local
team member for the specified team, and indicates where the
coach is going next.
All
IntelliTEAM
Contract added to list (Team,
Team)
A new contract was added to the list of contracts being
maintained. This message shows both the requesting and
granting teams associated with the transfer process. The
requesting team (Team 1) identifies the origin of the contract.
All
IntelliTEAM
Contract cannot travel (Agent)
The requesting contract agent does not know where the
present source is, so it could not forward the contract request.
The contract failed. The number for the specified agent is
associated with the RTU address at the team member.
All
IntelliTEAM
Contract comm received (Team,
Team)
The contract agent has received a message. (Team 1) refers to
the contract’s originating segment, and (Team 2) refers to the
temporary segment, usually the segment through which the
message just passed.
All
Data Logging
