S&C Instruction Sheet 1043-550
51
Category
Event Description
Definition
Log Level
IntelliTEAM
Manual Op. Team Condition On
(Team)
A team entered a non-operational state because an unexpected
manual switch operation occurred. Typically the only
“expected” manual switch operation is closing a source
switch on a previously faulted team which proves that the
fault is gone, and allows RTN process to take place (if RTN is
enabled).
Normal
IntelliTEAM
Manual Op. Team Condition OFF
(Team)
The unexpected manual switch operation team condition was
cleared. This can only occur as a result of a user request.
Normal
IntelliTEAM
Man. Op. Condition Clear Fail
(Team)
Manual Operation condition could not be cleared on a user
request because the local team member is not in its normal
state.
Normal
IntelliTEAM
Message timeout (Team, Code)
A message on the comm list for the specified team has
timed out, based on a timer in either the IntelliTEAM II
software (Code 1) or in DNP (Code 2).
Normal
IntelliTEAM
New coach generated (Team)
A new coach has been generated at the local team member for
the specified team. This could be caused by a power up state,
by the existing coach being lost due to communications failure,
or by the existing coach data being inconsistent.
Normal
IntelliTEAM
Normally open sw. auto open
(Team, Rec)
A normally open team member has opened for an automatic
(IntelliTEAM-initiated) reason. This may happen during
Return To Normal process. The team and the member record
number are provided.
Normal
IntelliTEAM
Not all configured teams xfer
ready
At least one of the active teams where the local control is a
member is not fully operational.
Normal
IntelliTEAM
Prohibit restoration timer expired
The timer for the Prohibit Restoration feature has expired and
will cause Prohibit Restoration to become active. (Team 1)
indicates the team number to which this event applies.
Normal
IntelliTEAM
Rebuilding coach (Team, Code)
The coach for the specified team is being regenerated. This
may be caused by a power up event, a configuration change
in the team, or a lost coach due to communications failure. A
diagnostic code is also shown, contact S&C for code details.
Normal
IntelliTEAM
Register event disabled (Team)
The registering of events for distribution within the specified
team has been disabled at the local team member. This was
probably caused by a change in the team’s configuration on the
SETUP: Team screen.
Normal
Data Logging