S&C Instruction Sheet 1043-550
21
Transfer State
This is the present state of any transfer operations. When no transfer or Return-to-Normal
process is in effect, this field reads
Idle
. Possible values are:
Idle
The team configuration is normal, and no transfer or Return-
to-Normal operation is taking place.
Init
The first step of a transfer event, where data is quickly col-
lected from all team members, is taking place.
Rqst
The stage of the transfer event when the line segment is
requesting service restoration from an adjacent line segment
is taking place.
Grant
The stage of the transfer event when the line segment has
been asked to grant service restoration to an adjacent line
segment is taking place.
Wait
The team is not in a normal configuration, and is waiting for
additional circuit reconfiguration or return-to-normal.
RTN
The team is actively returning to a normal configuration.
Stop
An error has been indicated either locally or remotely, caus-
ing a stop transfer condition.
Fault
This is a special transfer state that is used by a team that is
presently isolating a fault.
Hold
This transfer state will be active when the team has
begun a transfer event, but the line segment is not yet
fully deenergized, requiring further transfer activity to be
delayed.
These fields apply to the individual team members in this team.
DNP/RTU Addr
This row shows the DNP/RTU address for each team member. You entered this informa-
tion on the
SETUP: Team
screen for this team.
Sw/Pos Num
This row shows the switch/position number associated with the team member, for example
“Sw1” for a single overhead switch. You entered this information on the
SETUP: Team
screen for this team.
Normal State
This row shows the state of each line switch when the circuit is configured normally. You
entered this information on the
SETUP: Team
screen for this team.
Individual Team Member
Status
Team Problems
