34 S&C Instruction Sheet 1043-550
Data Logging Setup
Figure 13. Data Logging Setup Screen.
This screen includes the following fields:
General Settings (for the UIM Historic Log, and enabling the Compact Flash):
Logging Level
Each historic logging event that is generated by the UIM application is assigned one of three
levels. The assignment is done by S&C. There are three levels supported: All (events useful
for detailed troubleshooting), Extended (events that allow more in-depth monitoring of
the application activity) and Normal (events that describe regular operation). The default
Logging Level is Normal, which tells Data Logging to log only the more basic events.
Normal
:
Logs only typical user-oriented information.
Extended
: Logs both user-oriented information and internal errors.
All
:
Logs user-oriented information, internal errors, and internal trace/
debugging
information.
Dup. Event Margin (millisec)
Sometimes the UIM application will generate identical historic events within a short amount
of time. Such “duplicate” events occurring right next to one another may flood the log,
without yielding much valuable information about the operation of the application. For
two events to be considered duplicates every element of their event records must match,
The
Data Logging Setup
screen (Figure 11) is used to select data that will be stored in the
UIM internal memory. Only the data you filter for storage can be displayed on the
Historic
Events View
screen. If you enable CF Logging, all data will be timestamped and stored on
the compact flash, without any filtering applied.
To display the Data Logging Setup screen:
Click the Data Logging button on the PRESENT CONDITIONS screen.
Data Logging
