S&C Instruction Sheet 1043-550
49
Category
Event Description
Definition
Log Level
IntelliTEAM
Config. Update, operation
resumed
The team configuration of any of the active local teams has
been re-enabled on the SETUP: Team screen. Team operation
is resumed.
Normal
IntelliTEAM
Config. Update, operation
suspended
The team configuration of any of the active local teams is
being changed on the SETUP: Team screen. While this change
is in progress, team operation is suspended.
Normal
IntelliTEAM
Contract approved switch close
(Team)
The specified team requested a contract, which then traveled to
the granting agent, was approved, and came back. The switch
has closed to energize the line segment.
Normal
IntelliTEAM
Contract declined (Team)
The contract request made by the specified team was declined.
Normal
IntelliTEAM
Contract request was accepted
(Agent)
The granting agent accepted the contract. The number for
the specified agent is associated with the RTU address at the
originating team member.
Normal
IntelliTEAM
Contract request was declined
(Agent)
The granting agent declined the contract request. The number
for the specified agent is associated with the RTU address
at the originating team member. Note that this message can
appear at any agent with the contract on its list.
Normal
IntelliTEAM
Contract requested by member
(Team)
The local team member has requested that the contract agent
negotiate a contract on behalf of the specified team.
Normal
IntelliTEAM
Contract resource limitation
(Code)
A contract agent found that resources were not available for
load transfer, because of either segment limitations (Code 2)
or capacity limitations (Code 3). The contract agent did not
forward the contract any further.
Normal
IntelliTEAM
Control feature fail (Team, Point)
Indicates the requested control feature did not execute
normally.
Normal
IntelliTEAM
DNP rejected message (Rtu,
Code)
An IntelliTEAM communication message to the provided
RTU was rejected by communications. The rejection code is
provided.
Normal
IntelliTEAM
Error clrd - getting all switch data
The error collecting data related to the internal switch function
was cleared.
Normal
IntelliTEAM
Error get comm task from list
An error was detected when removing a message from the
DNP communications buffer.
Normal
Data Logging
