S&C Instruction Sheet 1043-550
57
Category
Event Description
Definition
Log Level
IntelliTEAM
Contract dup rcvd (Agent , State)
The specified requesting agent received an old or duplicate
contract message, which refers to the indicated contract state.
The number for the agent is associated with the RTU address at
the team member.
All
IntelliTEAM
Contract maintained (Agent)
Scheduled maintenance of a contract was performed by the
specified requesting agent to confirm the continued need for
the contract. The number for the agent is associated with the
RTU address at the team member.
All
IntelliTEAM
Contract not found (Agent)
A contract agent received a message about a contract that is not
in its list. This may result in the contract being dissolved and,
if necessary, reactivated. The number for the specified agent
is associated with the RTU address at the originating team
member.
All
IntelliTEAM
Contract request travel (Team,
Rec)
A contract request is traveling between teams. (Team 1) is the
segment through which the request just came, and (Rec 2) is
the team member in the direction where the request is headed.
All
IntelliTEAM
Contract requires member wait
(Team )
The specified team is waiting for a contract to be requested,
granted, or declined.
All
IntelliTEAM
Contract started by member
(Team)
A member of the specified team has determined that it can
close based on information from the coach, but it must first
request a contract.
All
IntelliTEAM
Contract transmit busy (Agent)
A contract agent’s transmit buffer was full. The message is
held until the transmit buffer has space, and is then sent. The
number for the specified agent is associated with the RTU
address at the originating team member.
All
IntelliTEAM
DNP feeder loading data rcvd
(Data)
Feeder loading data has been received from the source
substation or breaker, and may be used in determining the
capacity of the circuit during transfer operations. Data 1
indicates the circuit loading received in increments of 10 amps
per count.
All
IntelliTEAM
Member cleared task lock
attributes
The team member logic cleared the execution lock on tasks
present on the task list. These tasks may now be executed by
the team member.
All
IntelliTEAM
Member requested (Team, Task)
The specified team has requested that the local team member
execute the task indicated.
All
Data Logging
