S&C Instruction Sheet 1043-550
13
Figure 4. Communications Diagnostics for the Universal Interface Module.
To display the Communications Diagnostics screen:
From the PRESENT CONDITIONS screen select the Comm Menu button, and click the
Comm Stats button to display the Communications Diagnostics screen (Figure 4).
This screen contains counters and statistics associated with DNP communications
and the IntelliTEAM II system. This page tracks communications statistics for each
team member in the team(s) where this control is a member.
RTU Address
This field shows the “DNP/RTU Address” for the team member associated with the
counts in the column below.
Xmit Count
This field shows the number of original packets transmitted to a single team mem-
ber.
Retry Count
This field shows the number of packets transmitted to a single team member due to
a retry of an original packet.
Fail Count
This field shows the number of communications failures with a single team mem-
ber.
Last 2way
This field shows the latency (in seconds) associated with the last request sent to a
single team member.
Min 2way
This field shows the minimum latency (in seconds) recorded for a request sent to a
single team member.
Communication Diagnosis
