S&C Instruction Sheet 1043-550
19
Operational Status
This is the operational status of the system. When the team members can perform team
operations, this field reads
Good
. Other Possible values are:
Coordination
The team coach is not being passed throughout the team,
causing a lack of team coordination.
Remote Config
The configuration of an adjacent team member is not consis-
tent with the local team member’s configuration.
Local Config
There has been a change to the local team configuration on
the
SETUP: Team
screen that has not yet been accepted.
Remote Error
An adjacent team member is indicating an error condition.
Local Error
The local switch is disabled because Prohibit Restoration is
ON, or because the switch has changed state from a faceplate
or SCADA operation.
Logic Disabled
The team logic has been disabled on the
SETUP: Team
screen.
Not In Use
This team is not in use.
No 2nd Contin.
The team is in a transferred state, but if an additional event
occurs, no further transfer is allowed.
Configuration Status
This is the status of the user configuration parameters essential for team operation. Pos-
sible values are:
NoRTU Addr
No RTU address was specified on the
SETUP: Communica-
tions
screen.
Stop + Data Chg
The “Team Setup” setpoint is in a “Stopped” state follow-
ing a change made to the team parameters on the
SETUP:
Team
screen.
Stopped
The “Team Setup” setpoint is disabled on the
SETUP: Team
screen.
Data Change
An unexpected change has been made to the team param-
eters on the
SETUP: Team
screen.
Record Count
The count of team member records on the
SETUP: Team
screen is incorrect. The team database must have at least
one record to be valid.
Not 1 Source
An incorrect number of source switches was configured on
the
SETUP: Team
screen. A team may have one and only
one source switch.
No Local Rec
No local record was found in the team database. One of the
team records must contain an RTU address that matches the
“DNP/RTU Address” entered on the
SETUP: Communica-
tions
screen.
Team Problems
