12 S&C Instruction Sheet 1043-550
Auto Operation Status
When IntelliTEAM initiates extended phase loss or 3 phase voltage loss open commands
to the external device, “Extended voltage loss trip” will be displayed, else “Idle” will be
displayed.
Interface Module Information
Software Product Name
This is the S&C name for the application software present in this Interface Module.
Product Version
The first two bytes 00.09 are the firmware revision bytes. 00 is the major version with 09
being the minor version. IntelliLINK uses these two bytes to match the screen set to the
application version loaded into the Interface Module. The remaining two bytes 00.02 are
the application build revision.
Product Version Codes
These eight bytes are unique to this firmware/product revision. These codes along with
the above Product Version are used to identify software installed in the field when trouble-
shooting concerns are being addressed.
EOS Version
The version of the operating system is displayed here.
Interface Module Commands
Clear Manual Switch Operations
When IntelliTEAM II has taken a team out of ready because of a manual operation, or a
NO OPERATION report was encountered, use this command to clear the internal error.
Troubleshooting Problems
