52 S&C Instruction Sheet 1043-550
Category
Event Description
Definition
Log Level
IntelliTEAM
RTN continue ok (Team, Code)
The internal Return to Normal process for the specified team
indicated that Return to Normal may continue to the next step.
The process’s result code is also shown.
Normal
IntelliTEAM
RTN disabled at switch (Team )
The Return to Normal process will not be carried out on the
specified team because Return to Normal is disabled on the
SETUP: Team screen.
Normal
IntelliTEAM
RTN in progress on any team
A team is presently returning the circuit to its normal
configuration.
Normal
IntelliTEAM
RTN not active on any team
No teams are presently returning the circuit to its normal
configuration.
Normal
IntelliTEAM
RTN return failed (Team, Code)
The internal Return to Normal process for the specified team
indicated that Return to Normal cannot continue. This may be
caused by a team member that has Return to Normal disabled
(Code 7), or by the adjacent source team not yet being in its
normal state (Code 6).
Normal
IntelliTEAM
RTN start event received (Team)
The local team member of the specified team received a
request to start the Return to Normal process. This follows the
end of the Return to Normal timer and the subsequent event
request.
Normal
IntelliTEAM
RTN start event request (Team)
The Return to Normal timer has expired, allowing the RTN
process to start on the specified team. This message indicates
that the specified team generated the event.
Normal
IntelliTEAM
RTN timer started (Team)
The Return to Normal timer was started by the local team
member of the specified team.
Normal
IntelliTEAM
SCADA prohibit restoration active
A SCADA command was received to prevent the restoration
of any load by this team member (the switch may not
close automatically), however protection is not affected. If
applicable, this message will also be displayed on power up.
Normal
IntelliTEAM
SCADA prohibit restoration
cleared
A SCADA command was received to re-enable the restoration
of load by this team member, and the switch may be closed
automatically. If applicable, this message will also be
displayed on power up.
Normal
IntelliTEAM
Sequence num resync (Team)
The sequence numbers of events for the specified team
have fallen out of synchronization. The last sequence
number received is shown. The local team member will now
resynchronize the number.
Normal
Data Logging
