38 S&C Instruction Sheet 1043-550
Browse By Page
Allows to browse through Historic Event Log, instructing the application to load a certain
group of events into Historic Event View. Four selections are available:
Oldest 8 Pages
Loads up to 160 (size of Historic Event View) of the oldest
qualifying events from Historic Event Log.
Newest 8 Pages
Loads up to 160 of the newest qualifying events from Historic
Event Log.
Prev 8 Pages
Loads up to 160 previous events, relative to the events cur-
rently in the View. Usually this means older events.
Next 8 Pages
Loads up to 160 next events, relative to the events currently
in the View. Usually this means newer events.
When one of these selections is made, Historic Event View is refilled immediately.
NOTE: Since Historic Event Log is circular, selecting Prev may cause the newest events
to be displayed (if the View currently holds the oldest) and selecting Next may cause the
oldest events to be displayed (if the View currently holds the newest).
Last Status Reset Time
This is the time data on the Logging Status Points screen was last reset. The Reset Status
Points command is located at the bottom of that screen, and in the General Management
section of the Data Logging Setup screen.
Last Special Event Reset Time
This is the time data on the Special Event Counters screen was last reset. The Reset Special
Counters command is located at the bottom of the Special Event Counters screen, and in
the General Management section of the Data Logging Setup screen.
Last Historic Log Clear Time
This is the time the Historic Log was last cleared. The clear command is located in the
General Management section of the Data Logging Setup screen.
Data Logging
