S&C Instruction Sheet 1043-550
55
Category
Event Description
Definition
Log Level
IntelliTEAM
Contract general error (Agent)
The specified contract agent detected a contract error. The
number for the agent is associated with the RTU address at the
team member.
Extended
IntelliTEAM
Contract is being dissolved
(Agent)
An active contract is no longer needed and is in the process
of being dissolved. The number for the specified agent is
associated with the RTU address at the originating team
member.
Extended
IntelliTEAM
Contract pending fail (Team,
Team)
The requesting contract agent was waiting for a response when
the timer ran out, so it failed the contract. The coach may
restart the contract request if it cannot find another alternate
source. This message shows the two teams involved with the
transfer process at this team member location, where (Team 1)
is the requesting team.
Extended
IntelliTEAM
Contract reactivated (Agent)
The contract is missing somewhere along its routing path, so
the requesting agent reactivated the contract. The number for
the specified agent is associated with the RTU address at the
originating team member.
Extended
IntelliTEAM
Contract receiver busy (Agent,
Agent)
A contract agent’s receiver buffer was full, so a contract
message was dropped. The numbers for the specified agent
are associated with the RTU address at the originating team
member.
Extended
IntelliTEAM
Control feature ok (Team, Point)
Indicates the requested control feature executed normally.
Possible point values are: 1 Point to operate switch, 2 Point
to block reclosing, 3 Point to block ground trip, 4 Point to
change profile.
Extended
IntelliTEAM
Loading data reset (Team, Code)
When a transfer with a known load value occurs, the
IntelliTEAM II software resets the loading data to reflect the
new value. This updates the information more quickly than the
“2-minute” load averaging. The code relates to the state of the
reset process.
Extended
IntelliTEAM
Op sw func return (Team, Code)
This message displays the internal code returned during the
operation of the local switch in the specified team. Contact
S&C for code details, this code is application specific.
Extended
IntelliTEAM
RTN process stopped (Team,
Code)
The Return to Normal process completed at the local team
member with the indicated completion code. For details on the
code, contact S&C.
Extended
IntelliTEAM
Unexpected State Change (Team)
The transfer state went through an unexpected transition at
the specified team. This error might stop an ongoing transfer
process.
Extended
Data Logging
