S&C Instruction Sheet 1043-550
45
Category
Event Description
Definition
Log Level
DNP
Object variation error (Object
Type, Source Address, Destination
Address, Variation)
The variation of the object that was returned in the response
message is invalid or unsupported.
Extended
DNP
Object/variation not supported
(Source Address, Object Type,
Variation, Code Location)
The object being processed does not include a support object
and variation combination. An attempt will be made to
continue parsing other objects within the message.
Extended
DNP
Parsed data buffer full (Object
Type, Source Address, Destination
Address, Variation)
The data buffer containing the parsed object data is full. No
further parsing of this response message will take place.
Extended
DNP
Peer device added to list (Peer
RTU Address, Port Code, Master
Flag, N/A)
The peer device was successfully added to the peer device list.
Extended
DNP
Peer device already on list (Peer
RTU Address, N/A, N/A, N/A)
Addition of the peer device to the list was unsuccessful
because the device is already on the list.
Extended
DNP
Peer device buffer full
A peer device was unable to be added to the peer device list
due to the buffer being full.
Extended
DNP
Peer device not on list (Peer RTU
Address, N/A, N/A, N/A)
The requested peer device was not found on the peer device list
when attempting to remove the device from the list.
Extended
DNP
Peer device removed from
list (Peer RTU Address, Code
Location, N/A, N/A)
The peer device was successfully removed from the peer
device list.
Extended
DNP
Point definition invalid (Map
Number, Point Index, Error Data,
Code Location)
A problem was found in the configuration data of a mapped
point. The map will not be initialized until the error is
corrected.
Extended
DNP
Port code invalid (Peer RTU
Address, Port Code, N/A, N/A)
An invalid port code was detected when attempting to add a
peer device to the peer device list.
Extended
DNP
Problem with Output Block
(Object Type, DNP Output Block
Status Code, Point Number,
Function Code)
An operation request was unsuccessful due to a problem in
the Control Relay Output Block of the message. See DNP
documentation for a complete list of DNP Output Block status
codes.
Extended
DNP
Receive data buffer full
The transport function receive data buffers are full. These
buffers hold the data portion of the received DNP frames. The
new frame is discarded.
Extended
Data Logging
