SANCH S3000 Series, User Manual

Page: 22 / 139

4-5
Parameters Functions Settings
Factory
Setting
Customer
00-05
User-Defined
Coefficient Setting
4 digit: 0-3: the number of the
decimal places
3-0 digit: 40~9999
0
00-06 Software Version
Read-only
00-07 Password Input
0~9999
0
00-08 Password Setting
0~9999
0
00- 09
Frequency and the
Operation Method of
IP06
Bit0=0: Frequency via the up/down
keys
Bit0=1: Frequency command
enabled after pressing the
data/prog key
Bit1=0: IP06&RS485 frequency
memorized
Bit1=1: IP06&RS485 frequency
not memorized
Bit2=0: Up/down pin frequency
memorized
Bit2=1: Up/down pin frequency not
memorized
Bit3=0: FWD/REV direction
memorized
Bit3=1: FWD/REV direction not
memorized
Bit4=0: Parameter memorized
Bit4=1: Parameter not memorized
0
00-10 Control Methods
0: V/F Control
1: V/F C PG
2: Vector Control (open loop)
3: Vector C PG (closed
loop)
4: Torque Control
5: Torque C PG
0
00-11
Forward Reverse
transition in V/F mode
0: Follow Pr. 01-00 to 01-08
Settings
1: Follow Pr. 01-00 to 01-08
Settings
2: V/F1.5 power curve (Do not skip
the start-up frequency)
3: V/F1.5 power curve (skip)
4: 2 power curve (do not skip)
5: 2 power curve (skip)
0