5-3
00-03
Start-up Display of the Drive
Factory setting
0
Settings
0 F (Master frequency command)
1
H
(Output
frequency)
2 U (multi-function display of Pr. 00-04)
3
Output
current
1
This parameter allows the start-up display to be customized. The display may still be
changed, but during each power on, the display will default to the setting in this
parameter.
00-04
Definitions of the Multi-Function Display
Factory setting
0
Settings
0 output voltage
1 DC-BUS voltage
2 voltage command
3 multi-step speed
4
Speed command for the Process
Control Operation step
5
Time remaining for the Process Control
Operation step
6
Remaining number of times for the
“restart after fault” feature
7 counter
value
8 torque loading
9 power factor 1.000
10 Power factor angle (0~180 degrees)
11 Output power (kW)
12 Output power (kVA)
13 Motor speed (rpm)
14 IGBT module temperature
15 Braking resistor temperature
16 Digital terminal input status
17 PID output command
18 PID feedback value
19 the q axis voltage (V/F and vector)
20 the d axis voltage (Vector only)
21 Magnetic flux
22 Overload accumulated time
23
Electronic thermal relay accumulated
time
24
Execution time of the multi-step
speed
25 quiescence stage
26 over-torque accumulated time
27 DC braking time
28 Compensated voltage
29 Slip compensation frequency
30
Running number of Encoder
(Channel 1)
31 PG position (position control)
32
Remaining pulses to reach position
control (home position)
33 DC voltage upon a fault
34 The output AC voltage upon a fault
35 The output frequency upon a fault
36 The current value upon a fault
37 the frequency command upon a fault
38 day (power-up time)
39 hour, minute
40 The upper bound frequency value
41 Over-torque level
42 Stall level limitation
43 Torque compensation gain
Summary of Contents for S3000 Series
Page 8: ...2 5 DIMENTIONS 2 5...
Page 9: ...2 6 403 216...
Page 10: ...2 7...
Page 11: ...2 8 S3000 IP06...