SANCH S3000 Series, User Manual

Page: 129 / 139

5-80
10-32 REV Limit of Absolute P2P Factory setting 0
Settings
0: No Limit
1~60000
1
10-31 and 10-32 are protective parameters. When the settings of 02-01~02-06 /
02-23~02-30 are set to d42 P2P FWD Limit/d 43 REV Limit and it is ON, AC drive will free
stop when it is over the limit.
10-33
P2P Command 0 Factory setting 0
Settings
0~50000 (in position control 2 mode)
10-34
P2P Command 1 Factory setting 0
Settings
0~50000 (in position control 2 mode)
10-35
P2P Command 2 Factory setting 0
Settings
0~50000 (in position control 2 mode)
10-36
P2P Command 3 Factory setting 0
Settings
0~50000 (in position control 2 mode)
10-37
P2P Command 4 Factory setting 0
Settings
0~50000 (in position control 2 mode)
10-38 P2P Command 5 Factory setting 0
Settings
0~50000 (in position control 2 mode)
10-40
P2P Command 7 Factory setting 0
Settings
0~50000 (in position control 2 mode)
10-41
P2P Pulse Factory setting 1
Settings
1~20000 (*4 for 10-00)
10-42
P2P mm Factory setting 1
Settings
1~20000
1
The distance that each pulse moves (mm) should use with 10-33~10-40 (8-point P2P
command) for application.