SANCH S3000 Series, User Manual

Page: 36 / 139

4-19
Parameters Functions Settings
Factory
Setting
Customer
04-32 The PCO Operation Direction
0~32767 (0: FWD; 1:
REV)
0
04-33 Process Control Operation Mode
bit0=0: direction
determined by Pr. 04-32
bit0=1: direction
determined by the master
speed control
Bit1=0: continuously
execute the process
control operation
Bit1=1: execute only one
process control operation
cycle
Bit2=0: zero speed
intervals disabled
Bit2=1: zero speed
intervals enabled
Bit3=0: operate at zero
speed upon time
extension
Bit3=1: operate at a
constant speed upon
time extension
Bit4=0: PCO disabled
Bit4=1: PCO enabled
0
04-34
Multi-Step Speed Operation
Mode
bit0=0: direction
determined by 04-32
bit0=1: direction
determined by the master
speed
Bit1=0: continuously
execute multi-step speed
Bit1=1: execute
multi-step speed based
on time (Pr. 4-15 to 4-30)
Bit2=0: zero speed
intervals disabled
Bit2=1: zero speed
intervals enabled
0
04-35 Disable Skip frequency width 0.00~400.00Hz 0.00
04-36 Interfere jump width 0.00~400.00Hz 0.00