SANCH S3000 Series, User Manual

Page: 72 / 139

5-23
02-10
Digital Input Operation Direction Factory setting 0
Settings 0~65535
Bit 0~7 1 High active
1
This parameter determines the level of the input signal operation.
02-11
Multi-Function Output 1 RA, RB, RC (Relay 1) Factory setting 0
02-12
Multi-Function Output 2 MRA, MRC (Relay 2) Factory setting 0
02-13
Multi-Function Output 3 MO1 Factory setting 0
02-14
Multi-Function Output 4 MO2 Factory setting 0
Settings 0 to 72
Settings Functions Explanations
0 No Function
1 AC Drive Running There is an output from the AC drive
2 Operation Speed Attained 1 (both
directions)
3
Operation Speed Attained 2 (both
directions)
4
Pre-set speed attained 1 (both directions)
5
Pre-set speed attained 2 (forward only)
6
Pre-set speed attained 1 (both directions)
7
Pre-set speed attained 2 1forward
direction)
10 Zero speed Drive output is below Min Frequency
11 Over-torque1oL2) Please refer to 06-08
12 Base block 1Pause)
13 Drive ready for use AC drive has no faults
14 Low voltage alarm 1LV) Please refer to 06-00
15 Error indication
16 Drive operation mode Output is on when the external terminals
have command and off if keypad or
RS485 have control.
17
PCO Run
18
PCO suspended
19
1
st
step of PCO completed