SANCH S3000 Series, User Manual

Page: 29 / 139

4-12
Parameters Functions Settings
Factory
Setting
Customer
02-07 UP/DOWN key mode
Bit 0=0: UP/DOWM following
the acceleration/deceleration
time
Bit 0=1: UP following the
constant speed, and DOWN
following the deceleration
time
Bit 1=0: UP following the
acceleration time, and
DOWN following the constant
speed
Bit 1=1: UP/DOWN following the
constant speed
0
02-08
The Acceleration
/Deceleration Speed of
the UP/DOWN Key with
Constant Speed
0.01~1.00Hz/ms 0.01
02-09
Digital Input
Responding Time
0.001~30.000 s 0.005
0~65535
02-10
Digital Input Operation
Direction
Bit 0~7=1 high active
0
02-11
Multi-Function Output 1
RA, RB, RC (Relay 1)
1: AC drive running
2: operation speed attained 1
(both directions)
3: operation speed attained 2
(both directions)
4: pre-set speed attained 1 (both
directions)
5: pre-set speed attained 2
(forward only)
6: pre-set speed attained 1 (both
directions)
7: pre-set speed attained 2
(forward direction)
0
02-12
Multi-Function Output 2
MRA, MRC (Relay 2)
10: zero speed
11: over-torque(oL2)
12: base block (Pause)
13: drive ready for use
14: low voltage alarm (LV)
15: error indication
16: drive operation mode
17: PCO Run
18: PCO suspended
0