SANCH S3000 Series, User Manual

Page: 32 / 139

4-15
Group 3: Analog Output/Input Parameter
Parameters Functions Settings
Factory
Setting
Customer
03-00 Analog Input 1 (AVI)
0: no functions
1: frequency/torque command
2: torque limitations
3: acceleration/deceleration time
gain
1
03-01 Analog Input 2 (ACI)
4: upper bound frequency
5: over-torque current level
6: torque compensation gain
7: over-current stall prevention
level during operation
0
03-02 Analog Input 3 (AUI)
8: torque compensation(Vector)
9: AVI auxiliary frequency
(multiplication by the ratio of AVI)
10: ACI auxiliary frequency
(multiplication by the ratio of ACI)
11: AUI auxiliary frequency
(multiplication by the ratio of AUI)
12: PID offset
13: Auxiliary frequency of master
frequency
0
03-03 (AVI) Analog Input Bias 1 -10.00~10.00V 0.00
03-04
(ACI) Analog Input Bias
2
0.00~20.00mA 4.00
03-05
(AUI) Analog Input Bias
3
-10.00~10.00V 0.00
03-06
(AVI) Positive/Negative
Bias Mode
0: zero bias
1: value lower than bias = bias
2: value greater than bias = bias
3: the absolute value of the bias
voltage while serving as the
center
0
03-07
(ACI) Positive/Negative
Bias Mode
0: zero bias
1: value lower than bias = bias
2: value greater than bias = bias
3: the absolute value of the bias
voltage while serving as the
center
1