SANCH S3000 Series, User Manual

Page: 91 / 139

5-42
05-05
Number of Poles for Motor 1 Factory setting 4
Settings 2~20
1
This parameter sets the number of poles of your motor (must be an even number).
05-06
Line to Line resistance R1 of Motor 1 Factory setting X
X
Settings m
*
05-07
Rotor resistance R2 of Motor 1 Factory setting X
X
Settings m
*
05-08
LM of Motor 1 Factory setting X
X
Settings MH
05-09
LC of Motor 1 Factory setting X
X
Settings MH
1
The settings of Pr.05-05 to 05-09 depend on the current rating of the inverter and the auto
tune feature. Please do not change these settings as incorrect performance may occur.
05-10
Iron Loss of Motor 1 Factory setting 1.5
Settings 0.0~10.0%
1
This parameter is defined as the percentage of the rated power.
05-11
Full-Load Current of Motor 2 Factory setting A xx.x
Settings ****A(30~120%)
05-12
No-Load Current of Motor 2 Factory setting A xx.x
Settings XXXA(5~90%)
05-13
Torque Compensation of Motor 2 Factory setting 0.0
Settings 0.0~25.0%
05-14
Slip Compensation of Motor 2 Factory setting 0.0
Settings 0.0~10.0%
05-15
Number of Poles for Motor 2 Factory setting 4
Settings 2~20
05-16
Line to Line resistance R1 of Motor 2 Factory setting X
X
Settings m
*
05-17
Rotor resistance R2 of Motor 2 Factory setting X
X
Settings m
*
05-18
LM of Motor 2 Factory setting X
X
Settings MH