Engine Start
1.
Close the choke and turn on the ignition, Advance the throttle to the full position.
2.
Flip the prop until the engine fires and dies. It may take a few more flips if it is the
initial engine start.
3.
Open the choke, advance the throttle to just above idle, flip the prop until it starts.
Maintenance
1.
Use standard or premium unleaded.
2.
Break in engine for 2 hours at half throttle.
3.
Check fuel system for air leaks when running.
4.
Keep the engines exterior clean and inspected regularly.
5.
Keep fuel filter clean.
6.
Remove and inspect reed valve every 6 months.
DLE Engines are made by Mile HaoXianG Model Technology Co. Ltd
DLE
Engine
User Manual
DLE – 20
Caution – Read Manual carefully before operation. Serious injury may result from improper
use.
Summary of Contents for DLE-20
Page 3: ......
