Sabio 2010D, Operation Manual

Page: 12 / 182

Introduction Page 1-4
_________________________________________________________________
Model
2010D
Gas Dilution Calibrator Specifications
Pneumatics:

Flow ac 1.0% of full scale

Flow repeata 0.15% of full scale

Flow lin 0.5% of full scale
Diluent:

Mass flow controller range 0 - 10 SLPM (Optional 0 - 20 SLPM)

Input pressure 20 - 30 PSIG

Port 1, normally air (Optional Port 2, user defined)
Source:

Mass flow controller range 0 - 100 SCCM (Optional 0 - 20 SCCM,
0 - 50 SCCM, 0 - 200 SCCM, 0 - 500 SCCM, 0 - 1 SLPM, 0 - 2 SLPM)

Optional second source mass flow controller

Input pressure 15 - 30 PSIG

Four gas cylinder input ports (Optional two additional ports)

Source manifold purge port

Optional external permeation oven input port

Usable dilution ratio varies with flow controller selection, add
a second source flow controller for wider dynamic range

Solenoid valves for diluent, source and purge ports

Eight calibration gas output ports

Optional output solenoid valve

GPT reaction chamber meets EPA requirements

Attains 95% of Set Point in less than 60 Seconds

Wetted surfaces are composed of stainless steel, Teflon, Peek,
Halar or glass; all ports Swagelok or equivalent; Viton and Calrez
seals