Sabio 2010D, Operation Manual

Page: 47 / 182

Installation Page 4-14
Table 4-6
Model
2010D
to PC Connections
2010D
PC PC
9 PIN SIGNAL 9 PIN 25 PIN
SIGNAL SIGNATURE FEMALE FLOW FEMALE FEMALE
_______________________ ______ __________ ______ ______
CARRIER DETECT CD 1 <--------- 4 20
RECEIVE DATA RXD 2 <--------- 3 2
TRANSMIT DATA TXD 3 ----------> 2 3
DATA TERMINAL READY DTR 4 ----------> 6,1 6,8
DIGITAL COMMON GND 5 ----------- 5 7
DATA SET READY DSR 6 <---------- 4 20
REQUEST TO SEND RTS 7 ----------> 8 5
CLEAR TO SEND CTS 8 <---------- 7 4
RING INDICATOR RI 9
RS-232 Serial Communications Cable, Model
2010D
to Modem
A modem cable is required when connecting the Model
2010D
to a
modem for downloading software updates, remote control or other
applications. The cable should be equipped with a 9 pin female D
connector on the Model
2010D
serial communication port end for
COM1 or COM2 and a 9 pin female D connector or 25 pin female D
connector on the PC end. The pin outs for the modem cable are
given in Table 4-7.
Table 4-7 Model
2010D
to Modem Connections
2010D
Modem
9 PIN SIGNAL 25 PIN
SIGNAL SIGNATURE FEMALE FLOW MALE
_______________________ ______ __________ ______
CARRIER DETECT CD 1 <--------- 8
RECEIVE DATA RXD 2 <--------- 3
TRANSMIT DATA TXD 3 ----------> 2
DATA TERMINAL READY DTR 4 ----------> 20
DIGITAL COMMON GND 5 ----------- 7
DATA SET READY DSR 6 <---------- 6
REQUEST TO SEND RTS 7 ----------> 4
CLEAR TO SEND CTS 8 <---------- 5
RING INDICATOR RI 9 <---------- 22