Sabio 2010D, Operation Manual

Page: 50 / 182

Installation Page 4-15
J6-34 DIGITAL GROUND
J6-35 STATUS I/O BIT 18
J6-36 DIGITAL GROUND
J6-37 STATUS I/O BIT 19
J6-38 DIGITAL GROUND
J6-39 STATUS I/O BIT 20
J6-40 DIGITAL GROUND
J6-41 STATUS I/O BIT 21
J6-42 DIGITAL GROUND
J6-43 STATUS I/O BIT 22
J6-44 DIGITAL GROUND
J6-45 STATUS I/O BIT 23
J6-46 DIGITAL GROUND
J6-47 STATUS I/O BIT 24
J6-48 DIGITAL GROUND
J6-49 NO CONNECTION
J6-50 DIGITAL GROUND
Instrument Audit Analog Input/Output Port
A standard, off-the-shelf, serial data cable with a 25 pin D
male connector and clip on leads is supplied as part of the
instrument audit option. A custom cable may be required to meet
specific customer needs. The cable should be equipped with a 25
pin male D connector on one end and appropriate connections on
the other end.
Care should be taken to avoid ground loops and to prevent damage
to sensitive analog input circuitry. Analog input signals
should be a maximum of 10 Volts DC or less.