Sabio 2010D, Operation Manual

Page: 129 / 182

Serial Communications Page 7-27
_________________________________________________________________
Source 1 Valve
Source 2 Valve
Source 3 Valve
Source 4 Valve
Source 5 Valve
Source 6 Valve
Purge Valve
Output Valve
SSSSSS
= The states of the instument solenoids. Each
character is a 0 or 1, where 1 indicates that the
corresponding instrument solenoid output is active.
Ozone Data Fields
{o3 temp ctl} = The ozone lamp temperature setpoint (°C)
{o3 temp mon} = The measured ozone lamp temperature (°C)
{o3 lamp ctl} = The ozone lamp intensity setpoint (V)
{o3 lamp curr} = The ozone lamp current (no units)
{o3 lamp int} = The measured ozone lamp intensity (no units)
{o3 conc ctl} = The ozone concentration setpoint (PPB)
{o3 conc mon} = The calculated ozone concentration (PPB)
Photometer Data Fields
{photo avg} = The averaged ozone measurement (PPB)
{lamp temp ctl} = The photometer lamp temperature setpoint (°C)
{lamp temp mon} = The measured photometer lamp temperature (°C)
{lamp curr ctl} = The photometer lamp intensity setpoint (V)
{lamp curr mon} = The photometer lamp current (no units)
{lamp intensity} = The photometer lamp intensity (no units)
{det samp} = The photometer detector
– sample (no units)
{det ref} = The photometer detector
– reference (no units)
{gas temp} = The sample gas temperature (°C)
{gas pres} = The sample gas pressure (mmHg)
{gas flow} = The sample gas flow (SCCM)
PPP
= The states of the photometer pump and solenoid
valves. From left to right, these bits correspond to the
following solenoid valves:
Photometer Pump
Photometer Reference Valve
Photometer Sample Valve
Perm Oven Data Fields
{perm mfc ctl} = The perm MFC setpoint (SCCM)
{perm mfc mon} = The measured perm MFC flow (SCCM)