Sabio 2010D, Operation Manual

Page: 122 / 182

Serial Communications Page 7-20
_________________________________________________________________
Command Summary
Description Page # Command
Stop
20 S
Purge
21 P
Timed Sequence
22 TS {seq name},{point}
Manual Sequence
23 MS {seq name},{point}
Get Status
24 GS {status types}
Error Codes
If error responses are enabled, the Model
2010D
may return
the following error response codes:
01 Undefined Command The command was not recognized.
02 Check Sum Error The checksum calculated by the
2010D
did not match the checksum
in the command.
03 Buffer Overrun Error The calibrator's receive buffer
was overrun because the command
packet was too long.
05 Data Field Error The wrong number of characters
were received.
07 Data Error There was an illegal value in a
command parameter field.
12 Timeout Error The end of command character
(<CR>) was not received within
the timeout period.
51 Cmd Too Long The command field was too long.
52 Addr Too Long The address field was too long.
53 Resp Buff Overrun The response data buffer was
overrun.
54 Response Error There was an error calculating a
response data field.