Ryobi 5133002922, Operator'S Manual

Page: 23 / 456

Deutsch (Übersetzung der originalen Anleitungen)
21
English (Original instructions)
To reduce the risk of injury or damage, avoid contact with any hot surface.
Straight shaft symbol: When fitting the line spool to the cutting means, this symbol should be visible
to the operator.
Run position
Set the choke lever to “FULL” choke position.
Set the choke lever to "HALF" choke position.
Press the primer bulb 10 times.
Lock the throttle in position by depressing the throttle interlock button.
Waiting time 10 seconds.
Guaranteed sound power level is 108 dB.
EurAsian Conformity Mark
Pull: Quick release tab
Squeeze the throttle lock and throttle trigger to run.
Pull the starter rope.
Starting a cold engine by hand
Starting a warm engine by hand
Starting a cold engine by electrical starter
Starting a warm engine by electrical starter
Ukrainian mark of conformity