Preparing for Use
R&S
®
FPS
18
Getting Started 1319.3362.02 ─ 07
2.2.3
Login
Windows
7 requires that users identify themselves by entering a user name and
password in a login window. By default, the R&S
FPS provides two user
accounts:
●
"Instrument"
: an administrator account with unrestricted access to the com-
puter/domain
●
"NormalUser"
: a standard user account with limited access
Secure User Mode
If the secure user mode option (R&S
FPS-K33) is installed, an additional
account is provided: the
"SecureUser"
.
The "SecureUser" is a standard user account with limited functionality. In
particular, administrative tasks such as LAN configuration or general instru-
ment settings are not available. Furthermore, for a "SecureUser", data that
the R&S
FPS normally stores on the solid-state drive is redirected to volatile
memory instead. Users can access data that is stored in volatile memory
during the current instrument session. However, when the instrument’s
power is removed, all data in volatile memory is erased.
For details, see
Chapter 2.6, "Protecting Data Using the Secure User
Automatic login
For the administrator account, an automatic login function is active by default. If
activated, login is carried out automatically for the administrator (with full access)
in the background when the R&S
FPS is started, without having to enter a pass-
word. This function is active until you explicitly deactivate it or change the pass-
word.
For information on how to deactivate or re-activate the automatic login, refer to
Chapter 2.2.3.1, "The Automatic Login Function"
Passwords
For all default user accounts, the initial password is
894129
. Note that this pass-
word is very weak, and it is recommended that you change the password for both
users after initial login. You can change the password in Windows
7 for any user
at any time via "Start > Control Panel > User Accounts".
Windows Operating System
Summary of Contents for R&S FPS
Page 25: ......
