Instrument Tour
R&S
®
FPS
36
Getting Started 1319.3362.02 ─ 07
3.3.1
OCXO Option (R&S
FPS-B4)
This option generates a 10 MHz reference signal with a very precise frequency. If
installed, and if no external signal is used, this signal is used as an internal refer-
ence.
Warm-up time for OCXO
When the instrument is switched on, the OCXO requires an extended
warm-up time (see data sheet). No warm-up time is required when starting
from standby mode.
3.3.2
Bandwidth Extension 160 MHz (R&S
FPS-B160)
The signal analysis bandwidth of the R&S
FPS can be extended by a hardware
option (R&S
FPS-B160). The bandwidth extension allows for a linear bandwidth
up to a maximum of 160 MHz with an output sample rate of up to 10 GHz. While
the extension can be activated or deactivated manually in the R&S
FPS base unit
(I/Q Analyzer application), it is activated automatically in some applications that
also support I/Q data analysis. See the application-specific documentation for
details.
Additional Hardware Options Without External Connectors
Summary of Contents for R&S FPS
Page 25: ......
