manualshive.com logo in svg

Rohde & Schwarz R&S FPS, Getting Started

Share
Download
Rohde & Schwarz R&S FPS Getting Started Download Page 126

Operating the Instrument in Manual Mode

R&S

®

FPS

103

Getting Started 1319.3362.02 ─ 07

Instrument status

The instrument is configured for operation with an external reference.

Progress

The progress of the current operation is displayed in the status bar.

Date and time

The date and time settings of the instrument are displayed in the status bar.

You can hide the date and time display in the status bar, or the entire status
bar ("Setup > Display > Displayed Items").
For details see the R&S

 

FPS User Manual.

6.2.7

Error Information

If errors or irregularities are detected, a keyword and an error message, if availa-
ble, are displayed in the status bar.

Note that the status bar is only visible on an external monitor or via Remo-
teDesktop from a controller PC (see 

Chapter 2.3, "Connecting USB Devi-

ces"

, 

on page 22 or 

Chapter 5.6, "How to Set Up Remote Desktop"

,

on page 69).

Depending on the type of message, the status message is indicated in varying
colors.

 

Understanding the Display Information

Summary of Contents for R&S FPS





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands