Rohde & Schwarz R&S FPS, Getting Started

Page: 33 / 148

Preparing for Use
R&S
®
FPS
10 Getting Started 1319.3362.02 ─ 07
2 Preparing for Use
● Putting into Operation ..................................................................................... 10
● Windows Operating System ............................................................................16
● Connecting USB Devices ................................................................................22
● Performing a Self Alignment and a Self Test .................................................. 23
● Checking the Supplied Options .......................................................................25
● Protecting Data Using the Secure User Mode ................................................ 25
2.1 Putting into Operation
This section describes the basic steps to be taken when setting up the R&S FPS
for the first time.
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric
shock, fire, personal injury, or damage.
●
Do not open the instrument casing.
●
Read and observe the "Basic Safety Instructions" at the beginning of
this manual, in addition to the safety instructions in the following sec-
tions. Notice that the data sheet may specify additional operating condi-
tions.
Risk of instrument damage
Note that the general safety instructions also contain information on operat-
ing conditions that prevent damage to the instrument. The instrument's data
sheet can contain additional operating conditions.
Putting into Operation