manualshive.com logo in svg

Rohde & Schwarz R&S FPS, Getting Started

Share
Download
Rohde & Schwarz R&S FPS Getting Started Download Page 58

Instrument Tour

R&S

®

FPS

35

Getting Started 1319.3362.02 ─ 07

tor supports twisted-pair category 5 UTP/STP cables in a star configuration (UTP
stands for 

unshielded twisted pair

, and STP for 

shielded twisted pair

).

For details see 

Chapter 5, "Controlling the R&S

 

FPS Remotely"

, 

on page 47.

3.2.9

USB

The rear panel provides four additional female USB (USB-A) connectors to con-
nect devices like a keyboard, a mouse or a memory stick (see also 

"USB"

on page 30). The two left-most connectors provide USB 3.0 interfaces.

Furthermore, a male USB DEVICE connector (USB-B) is provided, for example to
connect a printer.

3.2.10 AC Power Supply Connection and Main Power Switch

An AC power supply connector and main power switch are located in a unit on
the rear panel of the instrument.

Main power switch function:

Position 1: The instrument is in operation.

Position O: The entire instrument is disconnected from the AC power supply.

For details refer to 

Chapter 2.1.4, "Connecting the AC Power"

, 

on page 15.

3.3

Additional Hardware Options Without External
Connectors

Some additional hardware options are available which have no external connec-
tors and are not visible on the outside of the R&S

 

FPS.

●

OCXO Option (R&S

 

FPS-B4)

..........................................................................36

●

Bandwidth Extension 160 MHz (R&S

 

FPS-B160)

...........................................36

 

 

 

Additional Hardware Options Without External Connectors

Summary of Contents for R&S FPS





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands